-40%
Malcom Co, Ltd. SPS-2 Solder Paste Softener
$ 105.07
- Description
- Size Guide
Description
Malcom Co, Ltd. SPS-2 Solder Paste Softener.SPS-2 Parameter:
Item
Specification
Mixing Method
Pseudo-Planetary Motion
Revolution : Centrifugal stress makes solder paste fluid
Decentering Rotation : Mixed Vertically
Centrifugal Stress
Max. 50kPa (0.5kgf/cm2)
Built-in Timer
Settable 1 - 99min.
Paste Container Sizes
500g(100cc)×2
Balance
Auto-Balancing
Safety Interlocks
(1) Door lock : Locked during operation
(2) Unbalanced Motion Detector
Power
30W
Power Supply
AC100V+/-10% 50/60Hz
Battery Power
4 AA Batteries for Auto-Balancer
Weight
Approx. 20kg
Unlike hand mixing, the Malcom SPS Solder Paste Mixer is a non contaminating mixer which utilizes pseudo planetary motion to stir the solder paste. The SPS-1 provides uniform paste consistency regardless of operator skill. The paste temperature rises due to friction, enabling control over the solder paste viscosity. Now a solder paste can be pulled from the refrigerator and ready on the stencil, in less than 15 minutes! The SPS employs a pseudo-planetary motion whereas the solder paste container rotates slowly at the end of an arm which spins rapidly. The resulting centrifuge force causes the solder paste within the container to repeatedly fold over itself, thereby mixing and softening itself.
FEATURES & BENEFITS
§
Uses airtight containers so oxidation and humidity are no longer a concern.
§
Automated operation assures gentile softening, and unlike hand mixing, provides even consistency.
§
From refrigerator to screen printer in less than 15 minutes.
§
Centrifuge is self-balancing and has an off balance safety detector.
SPECIFICATIONS
Mixing method Pseudo-Planetary Motion
centrifuge stress under 0.5 kgf/sqcm
Built in timer Settable from 1 to 99 minutes
Paste temperature rise 0 to 25 C in less than 15 minutes
The unit spins but has noise as possible gear problem.
Since I am not technically familiar with it I sell it "As IS For Parts" with No Return No Refund.