GENUINE AMTECH! NC-559-V2 NO CLEAN Micro Soldering Flux 30cc ROL0 Clear Residue

Description

NC-559-V2 No Clean Micro Soldering Flux 30cc
Genuine AMTECH from Inventec performance chemicals!!!
Buy with confidence!!!
100% GENUINE
Comes with plunger and blunt tip needle
Fast Shipping Always!!
Made in USA!!!
Product Highlights
ROL0 flux classification
Exceptional print definition at high printing speeds
up to 100mm/sec
Long stencil life
Wide process window
Clear residue
Low voiding
Excellent wetting compatibility on most board finishes
Compatible with enclosed print heads
Print & Dispense grade solder paste available
Available Alloys
Alloy Temp °C Temp °F
63Sn/37Pb 183 361
62Sn/36Pb/2Ag 179 354
62.8Sn/36.8Pb/0.4Ag 179-183 354-361
60Sn/40Pb 183-191 361-376
43Sn/43Pb/14Bi 144-163 291-325
42Sn/58Bi 138 280
Recommended Profile
This profile is designed to serve
as a starting point for process
optimization using NC-559-V2.
To achieve better results with
voiding or to reduce tombstoning,
consider using a longer soaking
zone, (140-180 o
C) for 60-90
seconds, with a more rapid
pre-heat stage. If there is
evidence of solder de-wetting,
consider lowering the peak
reflow temperature, or reduce
the time above liquidus to <60
seconds.
Cleaning
NC-559-V2 is a no-clean solder paste that can be
left on the board for many SMT assemblies. For
applications requiring cleaning, NC-559-V2 can be
cleaned using flux residue removers such as Inventec
Disper 607 and Disper 610.